|
|
                |
   long lasting decorative protection. Ideally suited for residential uses, it levels and restores old surfaces and adds years of life to new ones.
Besides having a tough finish, Kover Krete™ adds beauty to any working or living environment. Create your own design through a wide variety of available custom colors, styles, and methods of application. Kover Krete™ lets you enhance virtually any concrete surface at a fraction of the cost of replacement. Since 1989, our Kover Krete™ Products have been proven effective world-wide to repair, protect and beautify existing surfaces. The Kover Krete™ System is an acrylic cementitious coating system for commercial and residential pool deck, patios, walkways, entries, driveways and parking lots. It combines the durability of concrete with the versatility of various colors, styles and textures. Our Kover Krete™ System makes beautiful impressions in a variety of decorative patterns. Job applications include both exterior and interior new concrete installations and acrylic concrete overlays. To repair, resurface, texture, stencil or stamp 1/4 inch thick decorative patterns using our acrylic concrete overlayment system, we have an excellent concrete solution. 
Acrylic The KOVER KRETE™ SYSTEM is a combination of an acrylic polymer, special type white cements and aggregates, that combine to form a white colored, durable, resilient surface finish that has exceptional wear resistance. The KOVER KRETE™ SYSTEM can be integrally colored with colors displayed on the KOVER KRETE™ INTEGRATED COLOR CHART, or color sealed with KOVER GARD™. KOVER GARD WB™ is a high performance floor coating primarily designed to color, protect, and preserve new and old concrete walking surfaces. It is formulated with specially selected resins, pigments, and fillers that prove a durable, colored surface highly resistant to abrasion. The KOVER KRETE™ SYSTEM is available as a one-part, Just-Add-Water mix, as well as our traditional two-part system including dry mix and LIQUID ACTIVATOR™. The LIQUID ACTIVATOR™ used in mixing the two part KOVER KRETE™ SYSTEM is an acrylic polymer emulsion, that adds adhesive properties, water repellence, and more flexural strength. Fresh Pour Concrete KOVER KRETE™ SYSTEMS introduces KOLOR HARDENERS™ for use on fresh pour concrete projects. 
KOLOR HARDENERS™ are pure synthetic and natural iron oxide pigments, blended with cements, specialty quartz crystals and surface conditioning agents that are light-fast, weather resistant and lime-proof. Designed to permanently color and harden freshly poured concrete floors, KOLOR HARDENERS™ are ideal for both indoor and outdoor projects such as: swimming pool decks, driveways, patios, sidewalks, entry ways, shopping centers, garages, parking lots, floors and all stamped concrete.
KOLOR HARDENER™ ADVANTAGES: light-fast and lime proof; bright and deep colors; provides hardener and denser surfaces, excellent wear, slip and skid resistance; resistant to weathering, freezing, thawing and scaling from de-icing salts; reduces the cost of periodical surface painting and provides superior stamping characteristics. COVERAGE RATE: (60 lb pails) Use 60 pounds per 100 square feet for most colors and service areas. Depending on the color selected and traffic area coverage requirements the total amount of KOLOR HARDENER™ needed will vary. 120 pounds per 100 square feet may be required for light colors. 
ANTIQUE RELEASE™ is a dry powder product color pigment blend that produces a unique coloring effect while providing a bond breaking capability for mat patterned stamping tools. Kover Krete™ ANTIQUE RELEASE™ products will complement or contrast the underlaying concrete surface. Overlay Stamp System KOVER KRETE™ STAMP MIX is a proprietary blend of polymer modified cement that can be stamped, textured, stenciled, integrally colored and stained to create a palate of choices to compliment any style or decor. KOVER KRETE™ STAMP MIX can be stamped to replicate practically any natural stone, clay brick or tile surface. This product is ideal for practically any interior or exterior application. KOVER KRETE™ STAMP MIX will achieve a strong and durable bond if the surface is properly prepared, and a bond coat is applied according to instructions. 
Self-Leveling Systems KOVER KRETE™ products include two SELF-LEVELING SYSTEMS: LEVEL-KRETE I™ and LEVEL-KRETE II™ LEVEL-KRETE I™ is a premium cement based, non-shrinking, self-leveling floor underlayment product designed for interior use. This single component product results in a smooth-sub-floor that typically will accept floor covering 14 hours after installation. LEVEL-KRETE I™ is not a Gypsum based product. LEVEL-KRETE I™ can be applied up to 4" in thickness and has an approximate work time of 20 minutes. Use LEVEL KRETE I™ to level or create a smooth surface on interior concrete floors, ceramic tile, or terrazzo floors. It can be used on new construction project to correct rough or unfinished concrete and to level out uneven floors. LEVEL-KRETE II™ is a self-leveling and self-finishing polymer modified cementitious underlayment for interior applications up to 1" in thickness and has a work time of approximately 10 minutes. LEVEL KRETE I™ & II™ PRODUCT ADVANTAGES: Cement based self-leveling product; walkable in 3-4 hours; approved by the Ceramic Tile Institute; typically accepts floor coverings in 14 hours; pumpable for better productivity; non-shrinking; non-dusting; excellent bonding and work time; compatible with most carpet and tile adhesives; and inhibits excellent healing characteristics. 
PRIME-KOTE™ is a re-emulsifiable agent and is des igned to be used with LEVEL-KRETE I and II ™ . PRIME-KOTE™ serves as a sealer and creates a suitable surface for LEVEL-KRETE I and II™ to adhere to. V.O.C. compliant. The PRE-KOTE™ SYSTEM PRE-KOTE™ SYSTEM is a cementitious pre-coating system for swimming pool re-plastering and pebble finishes. PRE-KOTE™ is a high quality, factory prepared product that forms a hard, rough textured base coat that is tightly bonded to the interior walls and floors of concrete swimming pools and spas. PRE-KOTE™ is available as a two-component system or as an all-in-one "JUST ADD WATER" mix. The two-component system is composed of a specially formulated PRE-KOTE™ LIQUID resin and a blend of dry powder cement ingredients. The PRE-KOTE™ INSTANT has the resin already mixed in the bag of dry cement ingredients. The PRE-KOTE™ actually becomes an integral part of the concrete pool or spa construction increasing the surface adhesion and strength of the marcite and pebble finishes. 
PRODUCT ADVANTAGES: Pop-offs virtually eliminated; No expensive heavy sandblasting; labor cost reduced; increased profit; unmatched warranty; eliminates long repair down time; eliminates existing plaster removal; becomes an integral component of concrete pool and spa construction; increases surface adhesion; and increases strength of marcite and pebble finishes.
RE-KRETE™ RE-KRETE™ concrete resurfacer is a special blend of Portland cement, sand, polymer modifiers and other additives designed to provide a shrinkage compensated repair material making thin repairs to sound concrete which is in need of surface renewal. RE-KRETE™ will provide a durable wear resistant surface designed to withstand heavy foot and vehicle traffic. RE-KRETE™ provides an economical alternative to removing and replacing existing old, spalled concrete. Use RE-KRETE™ for applications such as driveways, walkways, sidewalks and patios. RE-KRETE™ can be trowel applied for smaller applications or applied with a masonry brush for curbs, steps or squeegee. Links: Kover Krete Homepage Downloads: Kover Krete Color Chart |
  |
© 2003 The Design Center, All Rights Reserved.
|
|